Floriani Dream Weave Ultra
Definitive Support for Your Most Challenging Embroidery!
Use Floriani Dream Weave Ultra for adding extra support to light weight or delicate fabrics when stitching dense or large embroidery designs. Floriani Dream Weave Ultra adds a light layer of support so the embroidery stitches will not cause damage or distortion to the fabric. Fuse Dream Weave Ultra into place for an instant increase in thread count without adding bulk or changing the drape of the fabric - and use less stabilizer! Floriani Dream Weave Ultra can also be used as an interlining for dress and suit weight fabrics for apparel.
Great for embroidery on delicate or unstable fabrics.
Increases thread count of the fabric without adding bulk.
Protects the fabric from needle sheering or damage.
Decreases the amount of stabilizer required for the embroidery design.
Won't change the drape of the fabric.
Use to fuse over the back of scratchy stitching for soft, supple embroidery!
To Use:
Cut Dream Weave Ultra at least one inch larger than the embroidery design area. *A larger piece can be used if desired.
Place the fusible side of the product to the back of the fabric.
Set iron temperature to medium and press the product into place with a dry iron. Be sure to use a pressing cloth between the iron and the Dream Weave Ultra or press from the fabric side.
**This product is not a stabilizer; it is an important step in preparing the fabric for the embroidery or embellishment process.
**Note: All irons heat differently. Test by fusing a small swatch of Dream Weave Ultra on a scrap of similar fabric before beginning your project.